2 Disconnect the battery. 3. Remove the transmission shield (13mm bolts, see in the picture below): 4. Locate the sensor on the transmission, you can see it on the left, next to the bell housing ("P" in the scheme below). 5. Use the 10mm socket with the extender to unscrew the bolt at the top of the sensor. Carefully, pull it out TwoWays to Reset Your ECU. The first way is simply disconnecting the negative terminal of your battery. You may want to remove the entire battery if you wish too. After disconnecting the battery, wait for at least 5 minutes as there are still electrical current in the system. To fasten this procedure, just turn on your headlights to drain the code22: Open or short circuit of intake air temperature sensor lead, fail safe action:: starting bike, possible; riding bike, possible. you should download the SERVICE MANUAL pg 8-58. just looked up the other thread, thats the only way i know of resetting codes.. icant see a YEC ecu being any different :dunno. 1 Faulty sensor. One of the most common reasons for the airbag light to turn on in Pajero is a faulty sensor. The airbag system relies on a network of sensors to detect a crash and deploy the airbags. If one of these sensors is damaged or malfunctioning, it can cause the airbag light to turn on. Step4. Replace your negative battery cable. Many vehicles have ABS, or anti-lock brake systems, on their cars or trucks. The sensors are designed to monitor wheel speed and to regulate your brakes so that they do not lock up under certain driving conditions. Most ABS systems typically have individual sensors mounted on or near each wheel. Vay Tiền Nhanh Ggads.

how to reset engine light on pajero